Hydraulic 4-Colomn Press

High-tonnage column-type hydraulic presses of the Gefest-K03 series are designed to perform stamping, straightening, deep drawing operations in dies with a lower clamp - ejector (hydrocushion).

The column design of the presses has an important advantage when access to the working area is required from four sides. The size and strength of column presses compared to frame monolithic presses can be significantly higher due to their collapsible design.

Each part has lifting elements and well-thought-out design features for installation even in cramped conditions. For horizontal movement of the press are equipped with transport "skis".

Industrial area: stamping, straightening and bending of heated steel parts for the needs of general industry, the military-industrial complex, pressing of non-metallic materials (with heating plates), etc.

Standard equipment: 

• Two-hand switch
• Safety light barriers
• Protective fencing
• OMRON controller with LCD display
• Remote control panel
• Built-in at the top of the frame or floor-standing hydraulic unit
• Manual and automatic operating modes
• Increased productivity

Characteristics	Gefest 400К.03	Gefest 500К.03	Gefest 630К.03	Gefest 1000К.03
Capacity, ton	400	500	630	1000
Cushion Capacity, ton	25	40	63	100
Slide Stroke, mm	800/1000	800/1000	1000	1000/1200
Cushion Stroke, mm	300	300	400	400/500
Distance table – slide, mm	1000/1200	1000/1200	1200	1200/1400
Table and slide size, mm	1200x1200	1200x1200	1200x1200	1400x1400
Working speed, mm/s	3...8	3...8	3...8	3...8
Iddle speed, mm/s - Down - Up	120 70	120 70	120 70	120 70
Holding time under pressure, s	0...9999	0...9999	0...9999	0...9999
Power, kW	45	55	75	110
Weight, kg	16 000	21 000	31 000	45 000
Price, USD	по запросу	по запросу	по запросу	по запросу

 

Characteristics	Gefest 1500.02	Gefest 2000.02	Gefest 2500.02	Gefest 5000.02
Capacity, ton	1500	2000	2500	5000
Cushion Capacity, ton	300	300	300	300
Slide Stroke, mm	1250	1400	1500	2000
Cushion Stroke, mm	400	500	500	500
Distance table – slide, mm	1400	1800	2000	2200
Table and slide size, mm	1600x1600	2000x2000	2000x2000	2000x2000
Working speed, mm/s	3...8	3...8	3...7	2...5
Iddle speed, mm/s - Down - Up	120 70	120 70	120 70	120 70
Holding time under pressure, s	0...9999	0...9999	0...9999	0...9999
Power, kW	150	220	220	440
Weight, kg	95 000	185 000	255 000	550 000
Price, USD	request	request	request	request

Options:

• Ejector in the top plate ("active third effect")
• High capacity hydraulic system
• Dimensions of the table and slider according to the drawings of the Customer
• Roll-out table
• Heating plates (heating elements or induction heating)
• Additional transformer cabinet
• The location of the ejectors according to the drawings of the Customer
• Additional die plate
• Automation in line

Features:  

• Collapsible bed (welded and cast version)
  Simple and reliable hydraulic circuit
  Hydraulic components PSM-Hydraulics, Rexroth, Ponar, Duplomatic
  Cylinder seals NOK, Aston Seals
  Electrical components Schneider Electric, Omron
  Open source software - TM Gidropress

Overview of the Gefest 1000.K03 column press for straightening hot-forged rings along the plane:

Review of column press Gefest 500.K03